Double-Ended Pivot Bearing Order Form

***Riverhawk carries various quantities of our Flex Pivots in stock. Our typical lead time for orders not in stock is (6) weeks or less. Please contact Riverhawk Sales for confirmation of availability.

***The correct pivot for a specific application can be selected only after determination of required angle of deflection. applied loads and life expectancy as these are interdependent. The loads and deflection angles listed here are maximums and are not to be applied simultaneously. When unusual environments or multi-plane loading conditions exist, please consult Riverhawk Engineering. If your application is intended for space, please do not purchase directly from our site. You can contact Riverhawk Engineering to discuss your space application and we can work with you to determine your requirements. Riverhawk is not liable for any pivots purchased through our site which are incorrectly sized for your application.

<

Nominal Outside Diameter

(Inch)

D
0.0000
-0.0005

Torsional Spring Rate

(in-lb)
(Degree)

See Note 2

Radial Load Capacity
(Pounds)

Load at Center of “C”

See Note 1

Catalog Number Order your
Double-Ended
Pivot Bearings Below
Vc Vt L
±0.003
A
±0.005
C
0.005 to 0.015
Series 6000 Double-Ended
0.125 0.0140 28 25.5 0.2 0.045 0.085 6004-400
Qty:
0.125 0.0017 17.7 25 0.2 0.045 0.085 6004-600
Qty:
0.125 0.0002 2.2 4.7 0.2 0.045 0.085 6004-800
Qty:
0.1562 0.0279 44 44 0.25 0.057 0.11 6005-400
Qty:
0.1562 0.0035 27.6 39 0.25 0.057 0.11 6005-600
Qty:
0.1562 0.0004 3.5 7.4 0.25 0.057 0.11 6005-800
Qty:
0.1875 0.0473 63 63 0.3 0.067 0.13 6006-400
Qty:
0.1875 0.0057 39.6 56 0.3 0.067 0.13 6006-600
Qty:
0.1875 0.0007 4.9 9 0.3 0.067 0.13 6006-800
Qty:
0.25 0.1141 113 113 0.4 0.09 0.175 6008-400
Qty:
0.25 0.0143 70.7 100 0.4 0.09 0.175 6008-600
Qty:
0.25 0.0018 8.5 19 0.4 0.09 0.175 6008-800
Qty:
0.3125 0.2234 176 176 0.5 0.112 0.22 6010-400
Qty:
0.3125 0.0286 110 156 0.5 0.112 0.22 6010-600
Qty:
0.3125 0.0036 14 29 0.5 0.112 0.22 6010-800
Qty:
0.375 0.3840 253 253 0.6 0.135 0.265 6012-400
Qty:
0.375 0.0480 159 225 0.6 0.135 0.265 6012-600
Qty:
0.375 0.0058 19.8 42 0.6 0.135 0.265 6012-800
Qty:
0.5 0.9080 450 450 0.8 0.18 0.355 6016-400
Qty:
0.5 0.1134 283 400 0.8 0.18 0.355 6016-600
Qty:
0.5 0.0142 35.4 75 0.8 0.18 0.355 6016-800
Qty:
0.625 1.8500 703 703 1 0.225 0.445 6020-400
Qty:
0.625 0.2321 442 625 1 0.225 0.445 6020-600
Qty:
0.625 0.0295 55 117 1 0.225 0.445 6020-800
Qty:
0.75 3.1800 1013 1013 1.2 0.27 0.535 6024-400
Qty:
0.75 0.3980 363 900 1.2 0.27 0.535 6024-600
Qty:
0.75 0.0500 78 169 1.2 0.27 0.535 6024-800
Qty:
1.0000 7.5200 1800 1800 1.6 0.37 0.735 6032-400
Qty:
1.0000 0.9390 1131 1600 1.6 0.37 0.735 6032-600
Qty:
1.0000 0.1175 141 300 1.6 0.37 0.735 6032-800
Qty:
Notes:
1. Pounds at zero deflection based on pure radial load. Performance of pivot is a function of number of cycles, angular
travel, and loading. Must use life cycle curves for selection of the proper pivot. When the load is applied directly through a single spring, multiply capacity by 0.707.
2. At zero load, Torsional Spring Rate may change with radial load.
Copyright © 2017 | Sitemap | Site Design By MPW Marketing